Common Tails (CCCats)
(Common)
Common Tails (CCCats) (Common)
Click to search ML for trait[This includes all Common Traits for CCCat Tails. They do NOT need to be listed at all when uploading a design, and are strictly informational. You may use as many as you’d like while designing a MYO]
- Long Tail
- Fur-Tipped Tail
- Kinked Tail - [An odd bend in the tail]
- Thick Tail - [Includes gecko tails]
- Fluffy Tail
Split Tail (1)
(Uncommon)
Split Tail (1) (CCCats) (Uncommon)
Click to search ML for trait[The tail is split once above the halfway mark]
- Traits that affect tail tips may apply to all tail tips present
- Counted by number of splits present in the tail
- Counts TOTAL splits across all tails
- Cannot split more than halfway down the tail
Shaped Tail Tip
(Uncommon)
Shaped Tail Tip (CCCats) (Uncommon)
Click to search ML for trait[The tip of the tail can take simple, flat forms such as a heart, star, circle, or club]
- Shapes should be simple, flat forms, or simple 3D forms.
- Shapes can be hearts, stars, circles, squares, simple lightning bolts, rings or have a small bit of dimension with spheres or cubes
- Can be solid shapes or have holes
- Cannot be overly complex or resemble a specific object.
Short Tail
(Uncommon)
Short Tail (CCCats) (Uncommon)
Click to search ML for trait[Tail that is short in length compared to the body]
- Tail can be as small as a nub, or just generally short in length.
- May be combined with tail shapes and traits
- Other traits cannot be used to appear as though the tail has been replaced, such as using Object Tail Tip to appear as though the entire tail is an object.
Spaded Tail
(Uncommon)
Spaded Tail (Uncommon)
Click to search ML for trait[The tail ends in a small spade, heart, diamond, or triangle shape]
- Tail can be a general heart, triangle, or diamond shape
- Can be complex in shape, have small prongs or protrusions, be hollow, solid, or just simple as long as they resemble one of the key spade shapes
- Spikes or spines on the spade should not trail onto the tail unless using horns/spikes in conjunction
Split Tail (2-10)
(Rare)
Split Tail (2-10) (CCCats) (Rare)
Click to search ML for trait[Tail splits up to 10 times]
- Up to 10 splits
- Traits that affect tail tips may apply to all tail tips present
- Counted by number of splits present in the tail
- Splits can begin at different parts of the tail but cannot be more than half of the tail length
- Splits can merge back together. The split and merged end count as a total of 2 splits
- Counts TOTAL splits across all tails
- Cannot split more than halfway down the tail
Hooked Tail
(Rare)
Hooked Tail (Rare)
Click to search ML for trait[Tail ends in a hook shape]
- Can be odd in shape, have holes, prongs or spikes, sharp or geometric bends, or intricate pieces as long as the shape is overall a hook.
- Should not resemble objects
Flat Tail
(Rare)
Flat Tail (CCCats) (Rare)
Click to search ML for trait[Tail is flat]
- Can have shapes, notches, and internal holes, but still requires shapes such as Spaded Tail or Hook Tail to change the tail tip.
- May be oriented horizontally or vertically
Twin Tail
(Rare)
Twin Tail (CCCats) (Rare)
Click to search ML for trait[Tail with a single split longer than half its length]
- Tail splits once past half the tail length
- Can be applied to any number of tails
- Each tail top can be affected by tail tip traits
- Cannot split at the base. This would be considered another tail
Object Tail Tip
(Rare)
Object Tail Tip (CCCats) (Rare)
Click to search ML for trait[Tail ends in an object of some kind]
- Tail can end in an object such as a bell, a rose or plant, a microphone, weapons, rattlesnake rattler, etc.
- Objects with multiple parts to it such as chains or multiple materials may be used as long as those parts would naturally appear as part of that object [Example: A lantern may hang from a short chain, have glass paneling, and metal casing. It would not include extra inserts such as candles, but those could be added as accessories]
- This trait is not needed when using Object Growth unless the object is different than the Object Growth [Example: A lantern tail with moss Object Growth]
- If the object glows [Light Bulb] or is metallic [Bell], it can have those effects, but the design would still require those respective marking traits if they were to appear elsewhere on the body.
- Cannot appear to replace the tail with an object
- Cannot have elemental effects
No Tail
(Rare)
No Tail (CCCats) (Rare)
Click to search ML for trait[No tail is present]
- Cannot be affected by any tail traits
Split Tail (11-20)
(Myth)
Split Tail (11-20) (CCCats) (Myth)
Click to search ML for trait[Tail splits up to 20 times]
- Up to 20 splits
- Traits that affect tail tips may apply to all tail tips present
- Counted by number of splits present in the tail
- Splits can begin at different parts of the tail but cannot be more than half of the tail length
- Splits can merge back together. The split and merged end count as a total of 2 splits
- Counts TOTAL splits across all tails
- Cannot split more than halfway down the tail
Hand Tail
(Myth)
Hand Tail (CCCats) (Myth)
Click to search ML for trait[Tail ends in a hand]
- Tail ends in a hand that matches standard CCCat anatomy and sizing. Must have claws
- Can be affected by Funky Feet
Multiple Tails (2-10)
(Myth)
Multiple Tails (2-10) (CCCats) (Myth)
Click to search ML for trait[Multiple tails located in standard tail placement]
- Can be any number of tails between 2 or 10
- Must be placed in standard tail location
- Tails do not need to be the same
- Tails may be affected by all tail traits, and require only one trait to cover all tails
Overgrown Tail
(Myth)
Overgrown Tail (CCCats) (Myth)
Click to search ML for trait[Tail that is very clearly larger than is proportional to the character]
- Can be applied to the entire tail, certain tail traits only [Example: Overgrown Spade], or both. May effect all tails a character has
Aquatic Host (Tail)
(Myth)
Aquatic Host (Tail) (CCCats) (Myth)
Click to search ML for trait[Tail that has aquatic features, denoted by a Caudal fin of some kind]
- Tail requires a caudal fin, can resemble a ray, a seal-like tail, or can be clearly a tentacle with suckers.
- Tail may also have fins on the tail only.
- The CCCat may also additionally have gills or webbing on their tail or elsewhere on their body.
- If applied to a design via the Aquatic Ink item, this trait cannot be swapped to any other trait.
Arthropod Host (Tail)
(Myth)
Arthropod Host (Tail) (CCCats) (Myth)
Click to search ML for trait[Tail that has arthropod features]
- Tail has arthropod features such as chitinous plating, segmentation, bug-like antennae, pincers/mandibles, etc.
- Can resemble a bug's tail or abdomen, like a scorpion tail, spider abdomen, lobster tail, or centipede-esque
- Naturally allows for chitinous plating and small mouth/face mandibles or pedipalps in addition to the tail trait
- Cannot have additional bug-like limbs unless using Unusable Limbs
Split Tail (21-40)
(Touched)
Split Tail (21-40) (CCCats) (Touched)
Click to search ML for trait[Tail splits up to 40 times]
- Up to 40 splits
- Traits that affect tail tips may apply to all tail tips present
- Counted by number of splits present in the tail
- Splits can begin at different parts of the tail but cannot be more than half of the tail length
- Splits can merge back together. The split and merged end count as a total of 2 splits
- Counts TOTAL splits across all tails
- Cannot split more than halfway down the tail
Multiple Tails (11-20)
(Touched)
Multiple Tails (11-20) (CCCats) (Touched)
Click to search ML for trait[Multiple tails located in standard tail placement]
- Can be any number of tails between 11 or 20
- Must be placed in standard tail location
- Tails do not need to be the same
- Tails may be affected by all tail traits, and require only one trait to cover all tails